Standard and alternative sizes of tires, wheels, PCD, disc offset and other specifications for Lada Kalina Sport 2012.

2012 Lada Kalina Sport Reference data Search and selection of tires and wheels for Lada Kalina Sport 2012

Below are all the modifications of Lada Kalina Sport 2012, where you can find tables with data on the correspondence of tire and wheel sizes, drilling, wheel offset, tire pressure and other parameters. If necessary, you can filter them by region.

Lada Kalina Sport 111x [2008 .. 2014]

Hatchback 5d (1119)

2012 Lada Kalina Sport 111x [2008 .. 2014] – Modifications

Petrol:

Lada Kalina Sport 111x [2008.. 2014] 1.4i

Generation : 111x [2008 .. 2014] [EUDM]
Years of production : [2008 .. 2013]

Lada Kalina Sport 111x [2008.. 2014] 1.6i

Generation : 111x [2008 .. 2014] [EUDM]
Years of production : [2008 .. 2014]

Tire, wheel and rim size data for other years of manufacture Lada Kalina Sport

Have a question about the characteristics of wheels and rims for Lada Kalina Sport 2012?
Found a bug or have comments? Share your knowledge

The hole in the center of the disc is known as the center hole diameter. Measured in millimeters.

– Recommended for winter
– Run-flat tires
– Link leads to a calculator for comparison
– Steel wheels
OE – Factory equipment
– Tire pressure
– Front axle
– Rear axle

The distance between the central plane of symmetry of the disk and the plane of contact with the vehicle hub. On disks, it is indicated by the symbols ET followed by a value in millimeters. Departure range is a mathematically calculated field (±2)

Backspacing refers to the distance between the landing plane of the disc and the plane along the inner edge of the disc.

This is the diameter of an imaginary circle drawn through the centers of the disc mounting holes.
PCD is measured in mm. For example, drilling (bolt pattern) 4×100 means that the rim has 4 mounting holes, and the diameter of an imaginary circle through the centers of the mounting holes is 100 mm.

hp – Imperial HP
kW – Kilowatts
PS – Metric HP

Recommended cold tire pressure, measured in bar or PSI.

The sales region is the region in which the vehicle was officially sold or is still being sold.

For example: 7J x 15 ET35
Wheel width in inches (7) x Wheel diameter in inches (15).
J is the shape of the side flange of the rim (may be JJ, JK, K or L). When selecting disks, this parameter is not taken into account.
ET35 – disk offset (distance between the wheel disk attachment plane and the rim symmetry plane, mm), positive 35 mm.

Example of a metric thread: M12 x 1.25
Thread Diameter (mm) x Thread Pitch (mm)
An example of an inch thread: 9/16 – 18 UNF
Thread diameter (in inches) – thread pitch

UNF – unified inch thread with fine pitch

Example: 215/55 R16 91 T

215 is the tire width in mm
55 is the ratio of profile height to width or simply 'profile'. With the same width, the larger this indicator, the higher the tire will be and vice versa
16 – diameter of the wheel (disk) in inches. (It is the diameter, not the radius!).Is this the inner size of the tire or the outer size of the rim
91 – load index. This is the maximum allowable load per wheel.
T – tire speed index